The quality of home decoration wires is judged by weighing

Category: Industry News

Time: 2018-01-04

Summary: The quality of home decoration wires is judged by weighing

The quality of home decoration wires is judged by weighing

Home decoration wires, an important member of the wire family, are all buried inside walls and their terminals are connected to our Dell power sockets

Home decoration wires are composed of 99.9% pure copper wrapped with an insulation layer. However, due to their wide range of uses and high purity value, some unscrupulous individuals manufacture inferior products by reducing the use of copper core materials and increasing the thickness of the skin. Reducing the amount of copper used will decrease the diameter of the copper core wire, and the resistance value will increase during use, which can easily cause fires.

So how to judge the quality of home decoration wires through weighing method?

Firstly, we cut a 4-meter-long 4-square-meter copper core wire and peeled off the surface, weighing 25.4 grams

 
weighing
 

Using 25.4/4=6.35 grams, the value of 6.35 can be determined as inferior wire

Because one square meter of wire should weigh 8.5 grams per meter, 8.5 is a base number

And how did 8.5 come about? Because the density of copper is 8.9, if one square meter of wire is taken as one cubic centimeter of copper, it should be 8.9 grams,

Because there may be some errors in the production process, 8.5 is a base number

So when we buy in the market, we buy in full circles, so we all need to know the weight of the entire roll of wire

Through experiments, we can conclude that

1.5 square meters per 100 meters should be above 1871 grams

2.5 square meters per 100 meters should weigh over 2915 grams

4 square meters of 100 meters should weigh over 4312 grams

6 square meters of 100 meters should weigh over 6107 grams

 
weighing
 

However, some unscrupulous vendors may reduce the copper content in the copper core wire but increase the thickness of the insulation layer, which can cause the weight to exceed this standard value

So we provide a standard range here, which is

The weight of a wire with a cross-sectional area of 1.5 is 1.8-1.9 kilograms per 100 meters

The weight of a wire with a cross-sectional area of 2.5 is 2.8-3.0 kilograms per 100 meters

The weight of a wire with a cross-sectional area of 4 is 4.2-4.4 kilograms per 100 meters

The weight of a wire with a cross-sectional area of 6 is 6.2-6.4 kilograms per 100 meters

Poor quality wires generally have a noticeable lack of weight and feel.

Keywords: The quality of home decoration wires is judged by weighing

Related Information

Company News

Industry News